First post! Thanks for all the great designs (I've built pedals with your Blue Pilot, Clown Centurion, and Boot Boost).
I'm working on a PCB layout for the Dyl-ei and I had a few questions about the schematic.
The transistor pins are reversed on the Dyl-ei and Trev-ei. Is that intentional? If not, which is correct?
Which transistor would you recommend for the Dyl-ei? 2N3904, as with the Trev-ei?
Which Creative Commons license is it released under? (I see BY-NC-SA, but which version)?
Thanks again!
Hi! You can share your builds in the other section if you want, if anything it will let you know if your pictures subtract from my own storage space or not 😁 - The transistor pins in the trev-ei are correct, the ones in the dyl-ei don't mean anything since there's no part specified. Having a circuit rely on a part number to work is bad, but is especially silly for something where "right" or "wrong" are so poorly defined, so that's my new standard. It means you can spend days testing different combinations, or maybe not, since I try my best to make it so you don't have to do that. - Thanks for paying attention to licensing. I don't know if it was out yet or not, but in doubt refer to 4.0.